7
CUSTOM PANEL DIMENSIONS
Material specifications
z
Maximum weight of door panels must not exceed 9kg (including handle)
z
The panel should be adequately sealed to withstand moisture (50°C @
80% RH). The back and sides of the panel should be completely sealed
with a waterproof vapour barrier, such as polyurethane, to prevent damage.
z
The back of the panel should be completely flush so that the seal between
the panel and the rubber trim is maintained. The door panel should not rest
on the surrounding cabinetry.
z
Installation outside these specifications may result in condensation on
cabinetry surfaces.
Toe kick profile
z
Depending on the desired toe kick recess depth, the toe kick panel may
need to be cut to clear the underside of the tub.
z
A cutting template has been supplied with your DishDrawer and digital
templates can be downloaded from fisherpaykel.com. For guidance on
using the provided template, refer to ‘prepare custom toe kick panel’.
z
Toe kick panel height can be determined by using the below:
*based on a door panel depth of 18mm
No cut profile
Recess of 40mm*
40mm
l
j
i
750mm
-
-
=
-
cavity height
upper panel extension
floor clearance
toe kick height
Cut profile A
Recess of 40 – 88mm*
40 – 88mm
Cut profile B
Recess of 88 – 100mm*
88 – 100mm
CUSTOM PANEL CONSIDERATIONS
MM
A
Minimum upper door panel height*
398
B
Minimum lower door panel height*
311
C
Minimum door panel width
596
D
Maximum extension of upper panel
-
E
Maximum extension of lower panel
50
F
Toe kick panel height*
58 – 118
G
Door panel depth
16 – 20
H
Minimum toe kick panel depth**
9
I
Minimum clearance between door panels
8
J
Minimum clearance between top of door panel and countertop
2
K
Minimum clearance between toe kick panel and floor
12
L
Minimum inside cavity height
820
M
Minimum height from floor to top of bottom drawer panel***
414
Maximum weight of each drawer panel (including handle)
9kg
*the top door panel may be extended up, or the bottom panel down from the fixed gap. Toe kick panel should be adjusted accordingly.
**if using supplied toe kick mounting screws. Panel can be fixed via screwing or gluing to the supplied mounting bracket.
***depending on adjustment of levelling feet
ISO
PROFILE
B
a
l
K
e
f
I
m
J
a
B
D
E
c
F
G
H
