13
SECURE TO CABINETRY VIA BRACKETS (METHOD A)
SECURE TO CABINETRY VIA DRAWER REMOVAL (METHOD B)
Partially open one of the drawers and
remove the first screw cover from the
trim moulding.
Secure to cabinetry via the brackets.
Pre-drilling a pilot hole may be required
depending on the cabinetry material.
1
2
3
4
Replace the trim cover and repeat for
the remaining brackets.
If fitted, secure the two top brackets to
the cabinetry.
1
2
Open the lower drawer and press both
locking tabs back to release.
Lift the drawer off the runners and
carefully set aside on a protected
surface. Push runners back in.
Take care not to pull drawer out too
far to prevent any strain on the hoses.
Where possible, protect the base of the
tub to prevent damage.
3
4
Secure to cabinetry via all four fixing
locations in the chassis.
Ensure sound insulation is
replaced correctly.
If fitted, secure the two top brackets
to the cabinetry.
Using your hand or the supplied hex
socket and a screwdriver, level the
DishDrawer™ Dishwasher as required.
Rotate clockwise to increase the height
of each leg and anticlockwise to lower.
It can help to reduce the loading on the
feet to assist the adjustment process.
