manualshive.com logo in svg

Fisher & Paykel DE8060P, Installation Manual/User Manual

Share
Download
Fisher & Paykel DE8060P Installation Manual/User Manual Download Page 40

40

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Cycle time longer 

than usual. 

Cycle time may be affected 
by a number of factors and 
is approximate. 

Cycle time is affected by the size 
and composition of the load, how 
wet/dry the load was to begin with, 
the environmental conditions the 
dryer is operating in, cycle options 
selected, sensing while drying and any 
interruptions during the cycle. Refer 
to ‘Sorting’. 

Small amount of 

water in the drum 

at end of cycle. 

Water tank needs to 
be emptied. 

Empty the water tank. 

Environmental conditions may 
be affecting dryer operation. 

If conditions are particularly hot and 
humid, it is possible vaporised water 
may re-condense in the drum or on 
the inside of the door. 

Noises. 

Dryer is overloaded. 

Remove some items from the dryer.

Dryer is experiencing a fault. 

Continuous beeping or a musical series 
of beeps with a message displayed on 
digital display. Refer to pages ‘Before 
you call for service’ and ‘Fault codes’.

Beeps signalling the end of a 
drying cycle. 

End of cycle beeps can be turned off.
Refer to ‘Drying options’. 

Vibration.

Dryer is not installed on a 
stable surface. 

Ensure the dryer is installed on a flat, 
stable surface. Refer to ‘Levelling 
the Dryer’.

Dryer is not level. 

Ensure the dryer is correctly levelled. 
Refer to ‘Levelling the Dryer’. 

Dryer is overloaded. 

Remove some items from the dryer.

Creasing.

Cycle selection not 
appropriate for the load. 

Select the 

EASY IRON

 cycle to 

minimise creasing.

Dryer is overloaded. 

Remove some items from the dryer.

DRYNESS LEVEL

 

selected 

too high for load type.

Try selecting a lower 

DRYNESS LEVEL

.

WRINKLE FREE

 option 

not selected.

Select the 

WRINKLE FREE

 option to 

rotate the load at the end of the 
drying cycle. Refer to ‘

WRINKLE FREE

’.

Wet items left sitting in the 
dryer for a long period before 
starting the cycle. 

Try not to leave wet items sitting in 
the dryer for long periods. 

Summary of Contents for DE8060P

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands