manualshive.com logo in svg

Fisher & Paykel DE8060P, Installation Manual/User Manual

Share
Download
Fisher & Paykel DE8060P Installation Manual/User Manual Download Page 13

INSTALLATION INSTRUCTIONS

13

ELECTRICAL

Volts

220 – 240

Hz

50

Amps (maximum)

10

Heating Power (W) 

1800

If you connect the white drain hose onto your dryer and you do not secure the other end 

in a drain, your dryer will drain water onto your floor. Ensure the drain hose is securely 

fixed in place to an appropriate drain and is leak-free at the connection to the machine.  

 

z

Regularly check that your standpipe or tub is free from lint and other obstructions, which 
may affect drainage and cause flooding.

 

z

The drain hose should be checked from time to time and replaced if any damage, 
eg wear, cuts, bulges, kinks, leaks, etc are found. Do not bend the drain hose sharply, as 
this may cause it to split.

 

z

The extended length of the provided drain hose is 1.3m. 

 

z

In multi-storey apartments or any upper floor, the machine should be installed on a floor 
equipped with a drain.

 

z

Draining must comply with local by-laws.

Electrical connection

 

z

This appliance must be connected to a 220V – 240V, 50Hz, sinusoidal, 
10A electrical supply.

 

z

Uncoil the power cord, remove and discard the plastic pin cover and plug into 
a power socket.

 

z

Connect the appliance to an earthed outlet protected by a fuse of suitable capacity.

 

z

Check the power cord for damage and make sure it is not squashed or twisted when  
installing the dryer.

 

z

Always remove the power cord from the power socket by the plug, not by the cord.

SPARE PARTS*

PART NO.

Drain hose

H0020300480Q

*Available from your Fisher & Paykel dealer or a Fisher & Paykel trained and supported 

service technician.

Summary of Contents for DE8060P

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands