manualshive.com logo in svg

Fisher & Paykel DE8060P, Installation Manual/User Manual

Share
Download
Fisher & Paykel DE8060P Installation Manual/User Manual Download Page 24

24

GETTING STARTED QUICKLY

4

If you wish to change a cycle or select a 
different option once a drying cycle has 
started, touch   then select the new 
cycle or option. 
Touch 

 to restart the dryer with the 

new cycle and/or settings.

When the cycle finishes, your dryer will beep and then turn off automatically. If 
the 

WRINKLE

 

FREE

 option has been selected the dryer will rotate the drum periodically 

blowing cool air into the drum to help minimise wrinkling and creasing of your load.
If you wish to stop the dryer before the cycle has finished you MUST remove the clothes 
IMMEDIATELY and spread them out to cool. DO NOT leave the clothes in the dryer or 
bunched up in a clothes basket. Take extreme care as the drum and the load items may be 
extremely hot. 
Failure to follow the advice in this guide may result in damage to your garments and your 
expectations of drying performance may not be met.

Summary of Contents for DE8060P

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands