Internal Venting
Front venting is the only recommended option for
venting into the room. The dryer is set up for front
venting when it leaves the factory.
Note: where possible all efforts should be made to vent
the dryer externally to avoid moisture build up around
the dryer.
Inverted Wall Mounting Installation
Your dryer has been designed to be inverted and
mounted on the wall above a washer or tub. A wall
mounting kit must be used. Inverting allows access to
the dryer control panel.
Tools and Parts Required:
• Drill and 3mm bit
• Phillips head screwdriver.
Wall Mounting Kit Includes:
• 2 x Plastic spacers
• 2 x Wall hanging brackets
• 2 x Hanging hook
• 4 x Wood screws
• 6 x Screws for hanging hooks and plastic
spacers.
Inverted wall mounting
Inverting the Panel
1. Unplug your dryer from the wall.
2. Invert the panel of the dryer by unscrewing the screws on the side of the console (
A
).
3. Remove the console from the dryer. 4 Unscrew six screws on the inside of the console (
B
).
Updated: Mon, 05 Oct 2020 18:08:12 GMT
Powered by
6
