42
Cleaning
Clean your dryer with a soft damp cloth and wipe dry. Do not use scouring cleaners as they can
damage the paint and plastic surfaces.
Interior
The drum is rust-resistant. However, colored fabrics which lose color or bleed in the washer may
cause discoloration of the dryer drum. We recommend that the dryer drum be cleaned with a
cloth using a detergent and water paste or a mild abrasive, such as Soft Scrub TM. Complete
cleaning by thoroughly wiping the drum with a moist cloth. Then tumble-dry several wet rags or
old towels for 20 to 30 minutes before using the dryer normally.
Exterior
Wipe off any spills or washing compounds. Wipe or dust with a damp cloth. Try not to strike the
surface with sharp objects. Dryer control panel and finishes may be damaged by some laundry
pretreatment soil and stain remover products if such products are sprayed on or have direct
contact with the dryer.
Pre-Treatment Sprays
Do not use pre-treatment sprays or liquids on or near your dryer as they can damage your
machine’s control panel as well as any of its plastic parts. Damage to your dryer caused by pre-
treatment products will not be covered by your warranty.
Stains
If stains appear inside the drum of your machine, mix a detergent and water paste (or use a non-
flammable liquid cleaner) and wipe over the stain with a soft cloth. Then tumble old towels for
20 – 40 minutes on the
FLUFF
cycle to remove all traces of the cleaner.
Lint Filter
The lint filter will need to be cleaned before each time you use
the dryer. It is easier to remove the lint when your fingers are
moistened. A lint filter that is clean ensures your clothes will remain
lint-free and your dryer will operate at maximum efficiency.
Regularly inspect the outdoor exhaust opening. Remove any
accumulated lint from this area and any surrounding areas.
Storage
To store your dryer for a short period of time, disconnect the power supply and clean the lint filter.
Summary of Contents for DE60FA2
Page 99: ......
