Internal venting
Front venting is the only recommended option for venting into the room. The dryer is set up for front venting when
it leaves the factory.
where possible all efforts should be made to vent the dryer externally to avoid moisture
build up around the dryer.
Inverted wall mounting installation
Your dryer has been designed to be inverted and mounted on the wall above a washer or tub. A wall mounting kit
must be used. Inverting allows access to the dryer control panel.
Tools and parts required:
• Drill and 3mm bit
• Phillips head screwdriver
Wall mounting kit includes:
• 2 x Plastic spacers
• 2 x Wall hanging brackets
• 2 x Hanging hook
• 4 x Wood screws
• 6 x Screws for hanging hooks and plastic spacers
Updated: Sun, 09 Feb 2020 16:40:35 GMT
Powered by
6
