28
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Dryer is
beeping,
displaying
unfamiliar
light patterns
and/ or a
message on
the digital
display.
Dryer has a fault.
Refer to page 21 for detailed
fault code.
Noises.
Dryer is overloaded.
Remove some items from
the dryer.
Dryer has a fault.
Continuous beeping or a
musical series of beeps with
a message displayed on
digital display. Refer to page
21 for detailed fault code.
Beeps signalling the
end of a drying cycle.
End of cycle beeps can be
turned off. Refer to page 25
of Use and Care manual.
Vibration.
Dryer is not installed
on a stable surface.
Ensure the dryer is installed
on a flat, stable surface.
Dryer is overloaded.
Remove some items from
the dryer.
Creasing.
Cycle selection not
appropriate for the
load.
Select the ‘Easy Iron’ cycle
(DE6060P only), or ‘Wrinkle
Free’ option to minimise
creasing.
Dryer is overloaded.
Remove some items from
the dryer.
‘Dry Temp’ and/
or ‘Dryness Level’
selected too hot/too
long for load type.
Try selecting a lower ‘Dry
Temp’ and ‘Dryness Level’.
‘Wrinkle Free’ option
not selected.
Select the ‘Wrinkle Free’
option to rotate the load at
the end of the drying cycle.
Dye transfer.
White/light and
coloured items not
separated before
drying.
Remember to separate
white/light and coloured
items before placing them in
the dryer.
Wet items left sitting
in the dryer for long
periods of time before
drying.
Do not leave wet items
sitting in the dryer for long
periods of time before
drying, if they are prone to
colour run. If you do intend
to leave them for long
periods before drying, then
separate the load and put
those items that may cause
colour run aside.
