27
11 TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Dryer is
taking too
long/ results
were not
satisfactory.
Drying cycle selected
not appropriate for the
load.
Select an appropriate cycle
for the load.
Dryness level selected
not appropriate for the
load.
Select a higher dryness level.
Selected drying temp,
not appropriate for the
load.
Select a higher drying temp.
Dryer overloaded for
the cycle.
Some cycles have a lower
max. load size. Refer to
pages 22 and 23 of the Use
and Care manual.
Try dividing the load in half
and dry half at a time.
Lint filter is blocked.
Clean the lint filter.
Load overly wet at the
start of cycle.
Remove more water from
the load before placing it in
the dryer, eg select a faster
spin on your washer, a speed
appropriate for your load.
Clothes
getting
too hot or
damaged.
Cycle selected not
appropriate for the load.
Ensure the cycle selected is
appropriate for items in the
load.
Items removed from
dryer before the end
of cycle cool down had
finished.
Removing items before cool
down may damage clothing
if it is not spread out and
exposed to cooler air once
removed from the dryer.
