Fisher & Paykel DCS WOSU30 Installation Instructions Manual Download Page 3

1

1

4

4

2

3

1

A

4 UNPACK THE OVEN AND REMOVE THE DOOR(S)

B

Double models featured for illustration purposes only

Junction box location 

for: 

undercounter 

installation

Junction box 

location for: 

wall installation

WOU130,WOSU30

Max. current draw:    19.4 A

Max. load:   

4.6 kW

WOUD230,WODU30

Max. current draw:    38.3 A

Max. load:   

9.2 kW

ELECTRICAL CONNECTION TO JUNCTION BOX

5

1

  Disconnect the power supply.

2

  Remove the junction box cover.

3

  Connect the oven cable to the junction box 

through the U.L.-listed conduit connector.

4

  Connect the two black wires together with 

twist-on connectors.

5

  Connect the two red wires together with 

twist-on connectors.  

6

  Connect electrical connection according to 

local codes and ordinances.

If local codes permit connecting the cabinet-
grounding conductor to the neutral white wire 
in the junction box:

7a

  Connect the factory-taped green and white oven 

cable wires to the neutral (white) wire in the 
junction box.

8a

  Replace the junction box cover.

OR

     If local codes DO NOT PERMIT 

connecting the cabinet-grounding 
conductor to the neutral (white) wire in 
junction box:

7b

  Separate the factory-taped green and white 

oven cable wires.

8b

  Connect the white oven cable wire to the 

neutral (white) wire in junction box.

9b

  Connect the green grounding oven cable 

wire to a grounded wire in the junction box.

10b

 Replace the junction box cover.

OR

     If connecting to a four-wire electrical 

system:

7c

  Separate the green and white oven cable wires.

8c

  Connect the white oven cable wire to the 

neutral (white) wire in junction box.

9c

  Connect the green grounding oven cable wire 

to the (green) grounding wire in the junction 
box. 

 

Do not connect the green grounding wire to 
the neutral (white) wire in junction box.

10c

 Replace the junction box cover.

Nameplate

cable from 

power supply

black 

wires

UL - listed 

conduit connector

box

red wires

white and green 

grounding oven 

wires - factory 

taped

UL - listed conduit 

connector

box

cable from 

power supply

white 

wires

red wires

green grounding 

oven wires 

- factory taped

black 

wires

(2,1)  -1- 599990A DCSWOU130&WOUD230install A2 USCA.indd 12/2/10 11:00:52 AM

(2,1)  -1- 599990A DCSWOU130&WOUD230install A2 USCA.indd 12/2/10 11:00:52 AM

Summary of Contents for DCS WOSU30









Reviews: