Fisher & Paykel CG903D Installation Manual Download Page 28

Page: 28 / 32

Complete and keep for safe reference:

Model

Serial No.

Purchase Date

Purchaser

Dealer Address

Installer’s Name

Installer’s Signature

Installation Company

Installation Date

INSTALLER CHECKLIST

TO BE COMPLETED BY THE INSTALLER
GENERAL

Specified clearance maintained.

Unit is level – front to back and side to side.

All packaging materials have been removed.

Dials turn correctly and freely.

Burners light satisfactorily, both individually and with other burners operating.

There is a constant flow of cool air from the cabinetry to the base of the cooktop.

Cooktop is securely clamped.

Basic operation has been demonstrated to the customer.

GAS

Manual gas shut-off valve installed in an accessible location.

Unit tested and free of gas leaks.

ELECTRICAL

Receptacle with correctly rated over-current protection is provided for service
cord connection.

Adequate ground connection.

Power supply cable is not touching the cooktop and accessible.

Summary of Contents for CG903D

































Search results

Summary of Contents for CG903D

Reviews:

Brands by name

Popular brands

Fisher & Paykel CG903D, Installation Manual

Search results

Summary of Contents for CG903D

Reviews:

Brands by name

Popular brands