manualshive.com logo in svg

Fisher & Paykel CG752D, Installation Manual

Share
Download
Fisher & Paykel CG752D Installation Manual Download Page 3

2

2

   PARTS SUPPLIED

Small pan support (1)

(some models only)

Dual Wok Pan support 

(Models with a Dual Wok only)

Pan support 

(not supplied with 
Dual Wok only models)

Wok stand (1)

Fibre washer (1)

Elbow 1/2“ BSP 
external thread (1)

Clamping 
brackets (4)
and screws 

NG regulator (1)

(NG models only)

ULPG test point 
adaptor (1)

(ULPG models only)

Installing multiple products

Note: We recommend installing multiple products in separate cutouts, with a minimum 5mm space between the glass edges of the adjacent products. 
If installing multiple products adjacent to each other within the same cutout, a separate joining strip kit is required for installation. 

The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our website listed at the end of this document.

If installing different products adjacent to each other (eg a wok burner next to an induction cooktop), the minimum clearance measurements for the different 
products may vary. Always use the greater distance

Mini wok Pan 
support (1)

(CG604D only)

Summary of Contents for CG752D

















Reviews:

No comments

Brands by name

Popular brands

Load more brands