Fisher & Paykel Aerotech OB30 S, User Manual

Page: 58 / 68

56
USING SELF CLEAN
IMPORTANT!
z
z
You must clean the inside glass door panel BEFORE starting a clean cycle. Failure to do
so may result in permanent staining or marking of the door glass.
See ‘Care and cleaning’ for our recommendations on how to do this.
z
z
Do not use oven cleaners, any degreasing cleaners, or oven liners.
z
z
Remove all oven shelves, trays, bakeware and utensils from the oven before starting a
clean cycle (except side racks). If left in the oven they will be permanently damaged;
items made from combustible material (eg wood, fabric, plastic) may even catch fire.
z
z
Do not use your oven to clean miscellaneous parts.
z
z
Make sure the room is well ventilated.
z
z
Before starting a clean cycle, make sure you move any pet birds to another, closed and
well-ventilated room. Some pet birds are extremely sensitive to the fumes given off
during a clean cycle, and may die if left in the same room.
z
z
During a clean cycle, the oven reaches higher temperatures than it does for cooking.
Under such conditions, the surfaces may get hotter than usual and children should be
kept away.
z
z
The oven door will be locked during the clean cycle.
z
z
If there are cracks or flaws on any of the oven door glass panes, if the oven seal is
damaged or worn, or if the door does not close properly, do not start a clean cycle.
Contact a Fisher & Paykel trained and supported service technician or Customer Care.
Self Clean takes care of the mess and grime that is traditionally associated with oven
cleaning. The extremely high temperature of the pyrolytic clean cycle burns off and breaks
down grease and grime deposits. All that is left is a small amount of ash that can easily be
wiped up.
There are two clean cycles available:
STANDARD CLEAN
(4 hours)
For normal or heavy soiling
LIGHT CLEAN
(3 hours)
For light soiling
Before you start
1
Remove all shelves, accessories and
utensils. You do not need to remove the
side racks.
2
Wipe up any spills, and along the inner
edge of the oven surface around the seal.
Failure to do so may discolor the oven
surface.
Avoid cleaning the seal itself as this may
cause damage.
3
Check the inner glass pane of the oven
door. If it has soiling on it, you will need
to clean it manually before starting a
Clean cycle. For instructions, see ‘Care
and cleaning’.
If soiling is left on the glass, it will
become burnt on during the clean cycle,
making it very difficult to remove.
4
Close the oven door firmly.