FB22004
Jeep® JK Wrangler
Front Stubby Winch Bumper w/ Tube Guard
2
2200401
3)
INSTALL YOUR BUMPER
2 PERSON LIFT
WITH THE WEIGHT OF THE WINCH AND BUMPER, IT
IS HIGHLY ADVISED TO HAVE HELP WHEN
INSTALLING THE BUMPER!
With the help from a second pair of hands, lift the
bumper up to the frame of the Jeep. Using the M10
hardware, insert an M10 bolt and washer through
the front of the bumper and into the bumper bracket
on the frame of your Jeep. Secure each bolt with an
M10 flat washer, M10 lock washer, and M10 nut.
4)
MOUNT THE SUPPLIED D-RINGS.
5)
RUN YOUR WIRING
Wire your new LED light using the supplied wiring.
DO NOT WIRE THIS DIRECTLY TO YOUR OEM FOG
LIGHT HARNESS.
Wire your winch according to the winch
manufacturer’s instructions.
6)
ENJOY YOUR NEW FISHBONE OFFROAD BUMPER!
