Items needed:
Items needed:
Fish Cat 5 Max
Cap
Core valve assembly
Base
Fish Cat 5 Max
Inflation pump
Step 1: Inflation
Step 2: Adjust the Seat
1. Close core valve assemblies and open valve cap.
2. Inflate the Fish Cat 5 Max to about 2.0 PSI using the hand pump. Depending on the brand of pump you are using, you can
use either the adapters that come with the pump, or the vinyl tubing and Boston valve adapter to attach the pump to the
valve.
3. A good rule to gauge the proper pressure is to push with your thumb at the center of the tube, when you can deflect about
3/4” from the top surface of the tube, it will be close to 2.0 psi.
4. The air chambers should be evenly inflated to prevent disfiguration of the float tube.
5. Cap the valves
1. Clip the seat straps to the side release buckles on the float tube.
2. Tighten the straps through the ladder lock buckle in the back of the seat.
3. Adjust the seat straps for most comfortable fit.
Changes in air temperature and elevation could cause the air inside the float tube to expand which could cause
damage to the AIREcells. Never leave your fully inflated tube sitting in direct sun light out of the water.
Always release some air when these conditions occur.