3
・
Places where gas tends to accumulate, such as a low position near a floor.
This is a single-purpose oral breath-measuring unit. Never inject any material other than
breath samples (E.g., liquid substances including chemicals, water, and saliva, or any
kind of gas). Ignoring this warning may cause mechanical failure or performance
degradation.
To obtain a stable measurement result, leave the power on during office hours. If you
have not powered on the machine for more than one week, the measured value may be
lower than the actual value immediately after power on due to the characteristics of the
sensor.
If you are not using the unit for a long period of time, disconnect the plug from the power
supply. Ignoring this warning may cause fire.
Do not wipe the surface with benzine, thinner, alcohol, etc. Use a clean, dry cloth when
cleaning. Ignoring this warning may cause inaccurate measurements, degradation of the
unit, or fire.
Do not wipe the syringe by rubbing it with alcohol. Do not touch the syringe with a bare
or gloved hand that has been exposed to an antiseptic solution.
Use only designated syringes.
Allow ten minutes before measuring if the subject has used a product containing
alcohol, such as mouthwash or toothpaste. It may affect the measurement results, or
influence measurement value.
Do not place anything on the machine. Ignoring this warning may cause overheating or
damage.
Do not disassemble the unit. We do not guarantee the accuracy of data or operation of
the unit if the unit has been disassembled.
