39
■
Injecting oral gas
1.
Confirm that “
Inject oral gas
” is displayed at upper right of “
Measurement data
” window
and that green READY lamp of OralChroma is lit.
2.
Open the lid on top of OralChroma.
3.
Insert the tip of syringe at a right angle to the inlet and push down strongly on the plunger
in one stroke to inject the entire breath sample into the OralChroma.
4.
Remove the syringe from the inlet upon completing the injection.
5.
Buzzer sounds and the green READY lamp turns off to start the measurement.
