Firstcom FC-136, Manual

Page: 17 / 21

29
Note:
The icon “ ” or “ ” shows on the LCD when this function is activated.
Setting CTCSS/DCS frequency
1. Press [ ], [ ] to open the CTCSS/DCS function.
2. Press [ ], [ ] to select the desired mode.
3. Press [ ] to confirm your select.
4 .Press [ ] and [ ] keys to set the receiving CTCSS/DCS.
5. Press [ ] / [ ] to select the desired CTCSS/DCS .
6. Then press [ ] key to set transmitting CTCSS/DCS, press [ ] / [ ] to select the desired one.
7. Press [ ] key to finish your setting.
a. OFF: No CTCSS/DCS with transmitting and receiving frequency.
b. TONE: CTCSS with transmitting frequency only
c. CTCSS : both with transmitting and receiving frequency
d. D CODE : DCS with transmitting frequency only
e. DCS: both with transmitting and receiving frequency
f. T DCS: Transmitting with CTCSS and receiving with DCS
g. D TSQL: Receiving with DCS and transmitting with CTCSS
30
You can use memory channel to store frequencies and other useful settings. And don’t have to reedit the
settings every time. 128 memory channels and 8 groups of memory channels available and you can also
name them (five alphanumeric letters).
Store Single Channels and Repeater Channels
1. Under the VFO mode, enter the desired frequency.
2. Press [ ] key, and “ ” is blinking on the LCD.
3. Press [ ] / [ ] to select the desired memory channel number to store.
4. Press [ ] key to finish the store.
The frequency and its settings will be store on the memory channels.
New storages will replace original ones.
It means original storages existed when memory channel number is blinking.
Memory Channel Mode
1. Press [ ] to enter the memory channel mode.
The last displayed memory channel shows.
2. Press [ ] / [ ] to select the desired memory channel.
Press [ ] key to back to VFO mode.