27
Setting Squelch (SQL)
In frequency mode, hold down [ ] + [ ];
Input then number on keypad (0-9).
VOX Sensitivity (VOX S)
Each speaking tone and volume is different. Test and adjust the sensitivity before use of VOX. Enter menu
24 then use [ ] / [ ] to select the sensitivity level (1-8 level).
Wide/Narrow band (WIDNAR)
Enter the menu 25 to select the desired band (WIDE/NARROW).
VOX Delay Time (VOX D)
To avoid missing the last talk time during the transceiver return to received mode. You can adjust the VOX
delay time. Enter the menu 23 then use the [ ] / [ ] to select the delay time (1s, 2s, 3s ,4s).
automatically once you stop speaking. Enter the menu 22 to open/close this function. VOX icon shows on
LCD when the function is activated.
When you use a external headset
You must adjust the VOX gain before use the VOX function otherwise background noise may trig VOX or
your voice is not sensitive enough to trig VOX.
28
Select offset direction
This function is use for repeater operation
1. Set the receiving frequency then press [ ], [ ], repeat to switch among, +, - and simplex.
Simplex
CTCSS/DCS is a tone frequency which can help you not to receive the call from those who use the same
frequency. CTCSS/DCS is the squelch audio signal. 50 CTCSS and 107 DCS available.
Change Frequency Stepping
1. Select the VFO mode.
2. Press [ ], [ ] keys, the frequency stepping appear.
3. Press [ ] / [ ] keys to select the frequency stepping from
5, 6.25, 10, 12.5, 25, 37.5, 50 and 100 KHz.
4. Press any key except [
LAMP
] and [
MONI
] to finish your setting.
Use CTCSS/DCS tone
1. Press [ ], [ ] to open or close the CTCSS/DCS function.
This transceiver provides seven modes for select.
Summary of Contents for FC-136
Page 21: ...37 CTCSS DCS...
