25
Open Password Protection (PSWD W)
Enter the menu 16 to set four digits as password.
The menu 15 function will be opened in default when finish the password setting.
Press [ ] to delete.
Open Password (PSWD)
Enter the menu 15 to open/close the password protection function. You should set four digts on the menu
16 before use this function.
Warning Tone When End of Transmitting (ROGER)
Enter the menu 17 to open/close the warning tone when end of transmitting.
Scan Type (SCN MD)
Enter the menu 18 to select the scan type (TO/CO/SE).
You have to select one of the scan types before using the scan function.
1. Time-operated scan (TO)
After the transceiver lock in a busy channel about five seconds, the transceiver begins scanning other
channel even the signal is receiving.
2. Carrier-operated scan (CO)
The transceiver will lock in one busy channel until there is no activity, and then it begins scanning other
Side Tone Eliminate (STE)
The beep tone eliminates after transmitting. This function is useful to headset user. Enter the menu 19 to
open/close this function.
Notice:
The function works base on your partner enable it also.
Time-Out Timer (TOT)
To prevent accidental prolonged transmission, etc, or avoid of damage to transceiver. When transceiver
continuously transmits for a period, it will stop transmitting and sound a alert tone. Enter menu 20 then use
the [ ] / [ ] to select.
TX STOP (TXSTOP)
You can set the transmitting inhibit to prevent the transceiver transmitting by wrongly or unauthorized operation.
Enter the menu 21 to open/close this function.
channels. There are two sec. delay between signal disappears and scan again.
3. Search scan(SE)
The radio stops on a busy channel and exit the scan mode.
VOX (VOX)
This function trig the transmitting when speaks to microphone without press PTT button.It stops transmitting
26
Summary of Contents for FC-136
Page 21: ...37 CTCSS DCS...
