Operation Manual
FW-1200-M
© 2012
First Water Systems, Inc
pg. 8
4 Post Operation Care
4.1 Flushing System
•
As soon as possible after an event, flush the system by
pumping clean water for at least 5 minutes.
•
Remove the Source Water Hose from the source and allow
the system to pump until no water is flowing.
•
Disconnect all power from the Filtration Unit.
4.2 Removing Filters
•
Remove Filter Housing/UV assembly from the case.
•
Detach power cord tether.
•
Unscrew each Canister.
•
Retain Canister O-Ring.
•
Remove and discard used Filters.
•
Drain water from Canisters and dry.
4.3 Cleaning System
•
Follow instructions above to flush and drain the system.
•
If sediment remains in the system, replace empty Canisters
and flush with clean water from a garden hose.
•
Follow steps above to remove and dry filter canisters.
•
Drain the UV Chamber by tilting unit slightly and allowing
water to flow from the Outlet.
•
Remove and drain all hoses.
