10
Problem
: Motor clicks, but chlorine is not drawn up the suction hose.
• Cause: Pump cap is loose.
• Solution: Hand tighten pump cap.
• Cause: Pump stem is not engaged into the piston clip in the water mo-
tor.
• Solution: Remove pump, check for broken or worn pump stem at tip.
Pump stem must be pulled out completely before being inserted into
the water motor.
• Cause: Damaged pump.
• Solution: Contact First Water for support.
Problem
: Chlorine is drawn up in the suction hose, but them falls back
down.
• Cause: Vacuum leak.
• Solution: Check suction hose to ensure a tight fit. Prime pump by
hand and verify that the solution stays up in the suction hose.
Troubleshooting
Summary of Contents for Flex-Chlorinator
Page 1: ...1...
