ONCE EXTENSION ARM (B) IS CONNECTED TO UNI-STRUT BRACKET, PROCEED WITH
FINAL ASSEMBLY INSTRUCTIONS BELOW.
1. Loosely attach backboard braces to extension arm using 2"x 3/8" U-Bolt, clamp bar, flat
washers, lock washers and nuts.
2. Remove and discard the shipping block (plastic piece) located at the backboard joint. Bolt on
backboard frame support to the center four holes located at the top of your backboard using the
5/16" hardware provided with the backboard.
3. Attach desired backboard and rim placing bolts through rim, backboard and extension arm.
Tighten with rim level to backboard and arm. Packaged in with your backboard are two black
rubber gaskets. Be sure to place one rubber gasket between the face of the backboard and the
rim and the other between the extension arm and the backside of the backboard. Trim gaskets if
necessary.
4. Attach backboard braces to side holes in backboard frame using 5/16" hardware provided.
Bend braces to fit as necessary.
5. Tighten all bolts.
FIRST TEAM SPORTS, INC.
902 COREY ROAD
HUTCHINSON, KS 67501
TOLL FREE: 888-884-6677
