FIRST TEAM SPORTS INTRUDER EZ-CRANK, Assembly Instructions Manual

Page: 6 / 8

26. Using (2) 5/16”x 4” hex bolt, (2) SPRING CUP, (2) RIM
SPRING, (2) flat washer and (2) 5/16” hex nut attach FLEX GOAL
(TOP HOLES) to BACKBOARD and BACKBOARD MOUNT as
shown. NOTE: The heads of the hex bolts should be on the
front face side of backboard with the flat washers and hex nuts
on the back side of BACKBOARD MOUNT. Hex bolts will pass
through SPRING CUP, SPRING, FLEX GOAL, BACKBOARD AND
BACKBOARD MOUNT.
27. Using (2) 5/16” x 1 ½” hex bolts, (4) flat washer and (2) 5/16” lock nut, attach FLEX GOAL (BOTTOM
HOLES) to BACKBOARD and BACKBOARD MOUNT.
28. Next, using (2) 5/16” x 5/8” hex bolts and flatwashers, secure left and right top sides of BACKBOARD
MOUNT to threaded inserts in BACKBOARD. CAUTION!!!! DO NOT OVERTIGHTEN HEX BOLTS!! TIGHTEN
UNTIL SNUG!
23. Using 3 people, attach BACKBOARD/BACKBOARD MOUNT/FLEX GOAL assembly to the ends of the
LOWER ARMS and UPPER ARMS using (2) ½” x 7” hex bolt, (4) flat washers, (2) ½” locknut, (4) ARM
SPACERS and (2) 2 ¾” long BACKBOARD MOUNT SPACERS. NOTE: BACKBOARD MOUNT SPACERS fit
inside the BACKBOARD MOUNT to help prevent over tightening ½” hex bolts. (See photo)