14. Insert the reduced end of the LOWER POST into the
bottom end of MID POST until the holes line up for the joint
attachment bolt. If the posts do not seat together easily, tap
them 4 to 5 times up and down.
15. Attach LOWER POST to MID POST at the post joint using
(1) 3/8” x 3.5” hex bolt (2) 3/8” flatwashers and (1) 3/8”
locknut as shown. BE CERTAIN TO INSERT BOLT WITH BOLT
THREADS PROTRUDING OUT THE BACK SIDE OF POST – AWAY
FROM PLAYING AREA!!!!
16. Following the procedure laid out above, attach the TOP POST section to the MID POST section and
secure using (1) 3/8” x 3.5” hex bolt (2) 3/8” flatwashers and (1) 3/8” locknut. BE CERTAIN TO INSERT
BOLT WITH BOLT THREADS PROTRUDING OUT THE BACK SIDE OF POST – AWAY FROM PLAYING AREA!!!!
17. Attach ACTUATOR BRACKET to MID POST using (2)
5/16” x 4” hex bolt, (4) flat washer and (2) 5/16” locknut as
shown. NOTE: FOR SAFETY, ATTACH ACTUATOR BRACKET
SO THREADED PORTION OF BOLT PROTRUDES AWAY FROM
PLAYING AREA. HEADS OF BOLTS SHOULD BE ON THE
FRONT SIDE OF MID POST!
18. Attach LOWER ARMS to TOP POST using (1) ½” x 7” hex bolt, (2) flat washer, (1) ½” locknut and (2)
ARM SPACER as shown. NOTE: ARM SPACERS are sandwiched BETWEEN the LOWER ARMS and the TOP
POST to prevent metal to metal contact.
Summary of Contents for INTRUDER EZ-CRANK
Page 8: ......
