FIRST STOP SAFETY
18
Protection from accidental mains connection
The BattPAT can detect when mains voltage is accidentally connected to either
the mains socket or the IEC socket. If the user tries to carry out a test under
these conditions the three red fail LEDs will flash and the test will not be done.
Testing 110 V appliances
This requires a 110 V adaptor. Just plug the adaptor into the BattPAT and
connect the appliance to be tested into the yellow 110 V socket. Then use the
BattPAT as normal.
Testing 3-phase appliances
This requires a 3-phase adaptor (Various models available). Just plug the adaptor into
the BattPAT and connect the appliance to be tested into the 3-phase socket.
Then use the BattPAT as normal.
These adaptors are designed to be used only with the BattPAT
for testing purposes; under no circumstances are they to be
connected to a mains outlet.
BattPAT
Issue 2.
