4
VX-2 Assembly: Attaching Upper/Lower Frame
M10x140mm bolts (2x) and (2x)
curved washers. Do not tighten.
M10x65mm bolt and washer
Tighten all three bolts.
Lower Frame
Upper Frame
Step 1:
Open box and remove contents. Lie Upper Frame on it’s back as shown here. In
the bolt pack, locate 2x M10x140mm bolts and curved washers along with 1x M10x65mm
dome head bolt and washer. Connect the Lower Frame to Upper using M10x140mm bolts
first and do not tighten before installing the third M10x65mm bolt as shown lower right.
Caution:
the curved washers can damage paint if not lying flush against oval tube when
tightened. Use care when securing.
CAUTION: Align the curved
washer with curvature of frame for
a flush fit and to avoid scratching.
Do not attempt to stand rower until
Footplate/Seat Rail assembly is attached.
See following page for details.
WARNING
Summary of Contents for VX-2 Fluid Rower
Page 1: ...1 Owners Manual...
