background image

22  

 

VORTEX SERIES ROWERS 

INTERNATIONAL WARRANTY – 

FULL 

COMMERCIAL USE

  

 

This product is designed and constructed for use in any Health Club / Fitness Studio application. 

 
First Degree Fitness Limited warrants that the 

Vortex Rower (model VX-1, VX-2 & VX-3)

, pur-

chased from an authorised agent and in its undamaged original packaging, is free from defects in 
materials and workmanship.  First Degree Fitness Limited or its agent will, at their discretion, repair 
or replace parts that become defective within the warranty period, subject to the specific inclusions 
and exclusions below. 

 

Metal Frame – 10 Year Limited Warranty 

First Degree Fitness will repair or replace the metal Main Frame of the Rower should it fail due to 
any defect in materials or workmanship within 10 years of the original purchase.  Warranty does 
not apply to frame coating. 

 

Polycarbonate Tank & Seals – 3 Year Limited Warranty 

First Degree Fitness will repair or replace the polycarbonate tank or seals should they fail due to 
any defect in materials or workmanship within 3 years of the original purchase. 

 

Mechanical Components (of a non-wearing nature) – 2 Year Limited Warranty 

First Degree Fitness will repair or replace any mechanical component should it fail due to any de-
fect in materials or workmanship within 2 years of the original purchase. 

 

All Other Components (of a wearing nature) – 2 Year Limited Warranty 

First Degree Fitness will repair or replace any component should it fail due to any defect in materi-
als or workmanship within 2 years of the original purchase. 

 

Specific Inclusions 

Bungee recoil cord, belt and pulley 
Hand grips & foot straps 
Polyester rowing belt / Dyneema cable 
Seat 
All pulleys, rollers & bearings 
All rubber components  
Computer & speed sensor (excluding replaceable batteries) 
All drive belts 
Aluminum seat rails 

 

 

General Exclusions 

Damage to the finish of any part of the machine 
Damage due to neglect, abuse, incorrect assembly or use of the machine 
Any charges for freight or customs clearance associated with the return or dispatch of parts 
Any damage to or loss of goods during transport of any kind 
Any labour cost associated with a warranty claim 

 

General Conditions 



The serial number of the machine must be correctly registered with First Degree Fitness Lim-
ited or one of its appointed distributors

 



First Degree Fitness Limited reserve the right to examine any part where replacement is 
claimed under warranty

 



Warranty period applies only to the original purchaser from the date of purchase and is not 
transferable

 



The product must be returned to your place of purchase in original packaging with transporta-
tion, insurance and associated charges paid for by you and risk of loss or damage assumed by 
you

 



First Degree Fitness makes no other warranties except as stated here and expressly disclaims 
all warranties not stated in this warranty.  Neither First Degree Fitness nor its associates shall 
be responsible for incidental or consequential damages

 



Manufacturer's warranty automatically commences upon sale of the product to end user or 
upon the expiration of one (1) year from month of manufacture, whichever occurs first

 

Summary of Contents for VX-2 Fluid Rower























Reviews: