The PK drive belt should rarely require tensioning, but should slippage be en-
countered, first remove the inspection plate cover. This will expose the tank
tensioning bolt which is tightened with a 13mm wrench. Turn clockwise and
test until slippage ceases.
Adjusting the E620 Drive belt
Note: If the belt is extremely loose, the tank bolts will have to be loosened
slightly before adjusting to allow maximum adjustment. This will require a
10mm Allen key and 19mm wrench (not supplied).
Do not over-tighten the tank bolts once adjustment is complete.
Tank tensioning bolt
Inspection plate
cover
For detailed instructions on complete
belt replacement, please contact your
local retailer/distributor.
Summary of Contents for E620 Seated UBE
Page 1: ...Owners Manual ...
