19
Detaching the Fluid Rower Belt
Reattaching the Fluid Rower Belt
Idle Wheel
Velcro facing
upward
Fluid Rower
Handle
Belt/Bungee Pulley
Bungee Shock Cord
Bungee Attachment Point
1. To detach belt, simply pull beyond the
range of the normal rowing stroke un-
til the belt detaches from the Belt
Bungee Pulley.
Tip:
You’ll hear the Velcro separating
just before the belt detaches.
2. Cut plastic tie holding bungee at the
Bungee Attachment Point, pull the
Cord through all three pulleys and
leave excess on top of the tank for
now.
1. Begin reattaching the Fluid Rower
Belt by threading around the Fluid
Rower Belt Pulley with the Velcro side
facing upward as illustrated.
2. Next, thread the Belt around the Idle
Wheel as shown. Once around the
Idle Wheel, attach the Fluid Rower
Belt to the Belt/Bungee Pulley. There
is an obvious “lip” at the attachment
point.
3. Wind the Fluid Rower Belt onto the
Belt/Bungee Pulley until the Fluid
Rower Handle is as it’s furthest for-
ward position.
Summary of Contents for DaytonaChallenge AR
Page 1: ...Owners Manual ...
