GENERAL FUNCTION
Citizen gas 6 and 9
15
6. GENERAL FUNCTION
6.1 FUNCTION: GENERAL PART
To locate the controls described below, refer to Fig 7-1, chapter 7.
6.1.1.
Illuminated ON/OFF general switch
When this switch is OFF, all the indicators on the control panel are off.
When ON, the switch itself and the thermostatic control come on, so
temperature can be set. Oven heating is disabled while the
switch is off.
6.1.2 Baking Start switch
With this switch in position O, the oven remains off, independent of set
temperature and power. Switching it to I, the switch itself lights up and the
oven begins to heat to the set temperature and power.
6.1.3
Oven temperature display
When programming, this display shows the programmed temperature.
The warning light to the side indicates when this temperature has been
reached. This display is also used for a number of error messages.
6.1.4
Set button
To enter temperature programming mode, press and immediately release
the
button.
IMPORTANT! to not hold it down for more than 4 seconds, because
this will enter parameter programming mode, with possible modifications to
thermostatic control parameters and consequent unpredictable malfunction.
In this way, the display
shows the programmed temperature that can
be modified using the
and
buttons. If no button is pressed for 3
seconds, the thermostatic control automatically returns to normal function.
For the range of temperatures that can be set, refer to chapter 8.
