4
BELT CLIP / STAND
This unit features a belt clip that can also be used as a stand.
1. Slide the belt clip into the slot located on the back of the unit, push the belt clip
upward to lock it in position as the figure below.
2.
Note:
To detach the stand, carefully push the stand downward. Do not pull the stand out
and away from the unit, doing this may break the stand or the back of the cabinet and
void the warranty.
Carefully remove belt clip by sliding it downward to unlock it from its slot. Flip the belt
clip over as shown below, and insert the small end of the belt clip into the locking tab
as shown below. Once attached, the belt clip will becomes a stationary stand for use
on a table top.
