![First Alert SFA1135 User Manual Download Page 10](http://html1.mh-extra.com/html/first-alert/sfa1135/sfa1135_user-manual_2293529010.webp)
9
5. Press the
/ -
button to obtain the desired sound level.
6. Press and hold the
button on the unit to turn unit into standby mode after
listening.
Notes:
- Use manual tuning to select weaker stations that might be skipped during automatic
tuning.
- If the automatic tuning does not stop on the exact frequency of the station, for
example, it stops on 88.9 MHz instead of 88.8 MHz, use the manual tuning method
to "fine tune" to the exact frequency of the desired station.
- In AM/FM radio mode, the station frequency will be displayed for about 8 seconds
before reverting back to the clock time.
HINTS FOR BEST RECEPTION:
- The AM/FM antenna is located inside the cabinet of the unit. If the AM/FM reception is
weak, change the position of unit until the internal antenna picks up the strongest signal.
P
PRESET RADIO STATIONS
This unit has 10 preset memories for the AM radio and 10 preset memories for FM.
1. Tap the
/MODE
button to turn the unit ON.
2. Tap the
MODE
button repeatedly to select AM or FM mode.
3. Tune to the desired radio station either by “manually” or “automatically” tuning method.
4. Press and hold the memory
MENU/PRESET
button to enable the program function.
The preset number “ CHANNEL 01” will show on the LCD display and flash.
5. Tap the
or
button to select the preset number you want to assign the station to.
6. Press and hold the
PRESET
button to save the station, channel number stops flashing.
7. Repeat above steps 3-6 to store other stations.
Note:
If you select an existing preset memory, the new radio station frequency will
replace the existing one.
RECALLING PRESET MEMORY CHANNELS
In AM/FM radio mode, recall the pre-set channels by tapping the
MENU/PRESET
button
repeatedly to scan through the preset channels.
WEATHER BAND
1) Weather Radio
1. Tap the
/MODE
button to turn on the unit.
2. Tap the
MODE
button to select the
"
WB
"
icon, and it will show on the display.
3. Tap the
TUNE+ / -
button to select the weather band channel for your area.
4. Press the
/ -
button to obtain the desired sound level.
5. To turn the radio off, press and hold the
button until the radio turns off and goes into
standby mode.