12
IMPORTANT
1. In COUNTY Mode (“COUNTY” is shown on the display), tap the
or
button to
select “SINGLE
”
. Tap the
SELECT
button, and the display will show “SAME 01”.
: You must to have the S.A.M.E. County Codes for the area you want to
monitor prior to setting the “SINGLE” or “MULTIPLE” codes below. Please read the
“County Codes for Programming Your Receiver” section of this manual for
information on how to obtain the codes before proceeding.
For “SINGLE” S.A.M.E. Code (Receive One County)
2. Tap the
SELECT
button again to program your 6 digit county code. The first digit space
will start blinking.
3. Tap the
button to scroll through digits 0-9 to input the first digit; it should always be
set to “0”.
4. Tap the
button to save each digit and move to next digit setting until all six digits
have been set.
5. Tap the
SELECT
button to save your “SINGLE” county code, then tap the
MENU
button
to exit.
6. The SFA1135 will only alert you when there is a warning/watch/advisory for the one
county you entered the S.A.M.E. code for, as long as it is within the area covered by the
NOAA broadcast you are monitoring.
For “MULTIPLE” S.A.M.E. Code (Receive Multiple Counties)
1. In COUNTY Mode (“COUNTY” is shown on the display), tap the
or
button to
select “MULTIPLE
”
. Tap the
SELECT
button, and the display will show “SAME 01”.
2. Tap the
SELECT
button again to program your 6 digit county code for the first county
you want to add. The first digit space will start blinking
3. Use the
arrow to scroll through digits 0-9 to input the first digit, it should always be
set to “0”.
4. Tap the
button to save each digit and advance to next digit until all six digits have
been set.
5. Tap
SELECT
button to save your “MULTIPLE” code to SAME 01.
6. Tap the
or
button to select SAME 02.
7. Repeat above steps 2-5 to program another county code. You can program up to 25
county codes.
8. Press
SELECT
button to save your
S.A.M.E
code,
9. Tap the
MENU
button 3 times to exit.
10. The SFA1135 will only alert you when there is a warning/watch/advisory for the
individual counties you entered the S.A.M.E. codes for, as long as it is within the area
covered by the NOAA broadcast you are monitoring.
Notes:
The display will automatically revert to clock when no buttons are passed for more
than 55 seconds.
