background image

 

-3- 

 
SeriTek/1VE4, & SeriTek/1eVE4 Specifications 

 

General System 
Hardware 
Requirements   

  PCI based Power Macintosh with available PCI 

expansion slot  

  PCI-X 1.0a compliant 64-bit at 133/100/ 66MHz bus 

speeds. Backw ard compatible with standard 32/64-
bit PCI at 33MHz and 66MHz bus speeds. 

Operating Systems 
Supported 

  Mac OS 9.xx  

  Mac OS X version 10.1.5 or later (works best with 

10.2 or later)  

Bus Types 

  32/64 bit, 33/66MHz PCI 

  133/100/66MHz PCI-X 

  Compliant with PCI bus version 2.2 

  Compliant with PCI-X bus version 1.0a 

External 
Connectors 

  SeriTek/1VE4:  4-port external Serial ATA (SATA) 

shielded interface connectors with “L shaped” key  

 

  SeriTek/1eVE4: 4-port external Serial ATA (SATA) 

shielded interface eSATA connectors 

Drive Types 
Supported 

  Serial ATA hard drive  

  Backward compatible with Ultra DMA 133/100/66 

hard drives* 

Data Transfer 
Rates 

  Up to 300 MBytes/second or 3.0Gbits/second burst 

data transfer rate 

Drive Modes 
Supported 

  Serial ATA  

  UltraDMA modes 6/5/4/3/2/1/0 

Advanced Data 
Features 

  Fully compliant with Serial ATA 1.0a specification  

  Bus Mastering off-loads data I/O handling from CPU  

  Complete 32-bit CRC error checking, for all bits 

transmitted (command, data, and status), offers 
enhanced data protection for high-speed Serial ATA 
drives  

  Four independent data channels allows for separate 

device timings 

  Automatically identifies and configures drive types*  

  Automatically detects and supports devices utilizing 

many transfer modes including UltraDMA 
6/5/4/3/2/1/0 

Onboard Flash 
ROM 

  Allows easy upgrades to the latest firmware 

Cables Supported 

  SeriTek/1VE4: 7-pin external Serial ATA (SATA) 

shielded cables with “L shaped” key on Host Adapter. 

 

  SeriTek/1eVE4: 7-pin external Serial ATA (SATA) 

shielded cables eSATA . 

Warranty  

  Two year limited parts & labor 

Physical 
Dimensions 

  163mm(L) x 1.6mm(W) x 64.4mm(H) (not including 

bracket) 

Power 
Requirements 

  5V ± 5% 

Environmental 

  Temperature: 

     Operating: +5°C to +55°C 
     Non-Operating: -25°C to +70°C  

  Relative humidity: 

     Operating: 20% to 80% 
     Non-Operating: 15% to 90%  

EMC Compliance 

  EN55022/1998, EN55024/1998 (European 

Community)  

  FCC Part 15 Class B (US) 

* IDE to Serial ATA converter module required for Parallel ATA and Ultra ATA133/100/66 drives 

 

Summary of Contents for SeriTek 1eVE4






























Reviews: