-8-
Using SeriTek/1eVE4 with SeriTek/2eEN4 requires cables have two rectangular “I
shaped” eSATA connectors, just like the two connectors shown below in Figure 3.
Figure 3: Using SeriTek/1eVE4 with SeriTek/2eEN4, Serial ATA Cable Connectors both are
eSATA “I shaped”
Making the SATA Connections:
Caution
: Be sure to connect the cable using the proper orientation to your SeriTek host
adapter and external enclosure. It should easily snap into place. Please do not force the
cable connector onto the host adapter and hard drive or peripheral interface.
Remember that male and female connectors must be of the same type for them to fit:
(L shaped female to L shaped male) or (eSATA female to eSATA male).
•
First check that you are connecting the correct type of connectors to each other
•
If your connectors still do not fit, rotate the cable and try again
