Using the SeriTek/1eSE2 host adapter with the SeriTek/2EN2 external enclosure
requires cables which have rectangular I-shaped eSATA connectors on both ends.
Making the SATA Connections:
Caution
: Be sure to connect the cable using the proper orientation to your SeriTek host
adapter and external enclosure. It should easily snap into place. Please do not force the
cable connector onto the host adapter and hard drive or peripheral interface.
Remember that male and female connectors must be of the same type for them to fit:
L-shaped female to L-shaped male or eSATA female to eSATA male.
First check that you are connecting the correct type of connectors to each other
If your connectors still do not fit, rotate the cable and try again
Formatting Serial ATA Hard Drives with Macintosh OS 9.XX
Caution:
Please make sure your data is backed up before attempting to format or change the
partition layout of your hard drives.
1.
Turn on your Power Macintosh computer.
2.
Open Apple
’
s
Drive Setup
.
To find and open this application:
a) Hold down the Command key and press the
“
F
”
key simultaneously.
b) Type in
“
Drive Setup
”
in the field with the blinking cursor
c)
Press Return key (See Figure 2).
