2
FirmTek, LLC
www.firmtek.com
Copyright
Copyright
©
1999-2013 FirmTek, LLC. All rights reserved.
No part of this manual may be
reproduced, translated by any means, photocopied, or transmitted in any form without the prior
written permission of FirmTek.
Trademarks
FirmTek, miniSwap,
UltraTek, AV-Tek, SeriTek names and logotypes are trademarks of FirmTek,
LLC. Apple, Macintosh, OS X, and the Mac logo are registered trademarks of Apple Computer,
Incorporated. The "Built for OS X" graphic is a registered trademark of Apple Computer,
Incorporated, and used under license. Windows, Windows 98/98SE, Windows 2000, Windows XP,
and Windows 7 are registered trademarks of Microsoft Corporation in the United States and other
countries. All other manufacturer product names mentioned in this manual are for identification
purposes only and are trademarks or registered trademarks of their respective owners.
Changes
FirmTek reserves the right to make any changes to product design, specifications, or details
without notice. Actual product photos or screenshots may look different from those provided.
Notice
The material content of this manual is for informational purposes only. It is possible the content of
this manual may contain technical inaccuracies, typographical, or other errors. FirmTek assumes
no liability for any errors, omissions, or from the use of this manual that may result from such
errors, including, but not limited to loss of data or profits.
Before installing the miniSwap/U3 or any other hardware or software, you are responsible for
backing up data contained on any storage devices. After the hardware or software installation, you
are responsible for backing up data on any storage devices at frequent intervals. FirmTek, LLC is
not liable for any loss of data or damage to equipment resulting from the use of FirmTek products.
External Shielded USB 3.0 Cable
Please use the USB 3.0 cable provided with the miniSwap/U3 to ensure integrity during data
transfers. Use caution and handle the cable with care. When inserting and removing the USB 3.0
cable,
hold the connector at the ends (not the cable)
when inserting and removing the cable
from the computer and the external USB 3.0 enclosure.
Note:
The
miniSwap/U3
cable and connectors: This external USB 3.0 cable/connector is
specifically design to provide secure connections with the miniSwap/U3.
The USB 3.0 cable
included with the miniSwap/U3 can be used with either USB 2.0 or USB 3.0 ports.
