Firman L03391, Owner'S Manual

Page: 21 / 120

Page 19 English Customer Service: 1-844-FIRMAN1
Starting the Generator (Recoil Start-LPG]
1. Before starting the generator, check for loose
or missing parts and for any damage which
may have occurred during shipment.
2. Check oil level .
4. Fully open the LPG cylinder knob
.
3. Connect the regulator to both LPG cylinder and
generator.
NOTE
:
Do not place the LPG cylinder in the path of muffler outlet
.
5. Disconnect all electrical loads from the
generator. Never start or stop the generator
with electrical devices plugged in or turned on.
6. Flip the engine switch to the " RUN "( l ) position.
8. Move choke lever located on engine to “ START ”
position.
10.Move the choke lever to the “ RUN ” position.
9. PULL TO-PRIME: -
Pull the starter cord 1-2 times. Pull slowly until
resistance if felt and then pull rapidly.
1-2 Times
11. PULL TO RUN: - -
Pull the starter cord slowly until resistance if felt
and pull rapidly to run the unit.
If the engine fails to start in 1-2 pulls with choke in the
“
RUN ” position, then move choke lever to “ START ”
position and repeat the “ PULL-TO-PRIME ” step.
7. Flip the battery power restore switch to the “ "
position for few seconds and then release.
l