FEC-AUO Capacitive Touch
This Capacitive Touch has auto calibration controller via USB interface. There are two different
methods which can initiate the touch auto calibration: (1) Reboot the Terminal. (2) Switch Off the
Display Module then Switch On Again
**Note** Capacitive touch screen will not operate with either a gloved hand or with a mechanical stylus. It is
made of glass, which makes it extremely durable and scratch resistant.
calibration when too many water or liquid stays on the glass during t
high to meet 80% non density . Thus, FEC recommends users to keep the liquid from the touch glass and
calibrate the touch screen.
EETI TouchKit Tools Installation
EETI TouchKit Installation for Windows XP
1. Down load Touch Kit for WinXP
2. Execute Setup.exe
3. Click Next
17
AUO Capacitive Touch Calibration
Capacitive Touch has auto calibration controller via USB interface. There are two different
methods which can initiate the touch auto calibration: (1) Reboot the Terminal. (2) Switch Off the
Display Module then Switch On Again
creen will not operate with either a gloved hand or with a mechanical stylus. It is
made of glass, which makes it extremely durable and scratch resistant. Capacitive touch might need the
calibration when too many water or liquid stays on the glass during touch operation or the humidity goes too
. Thus, FEC recommends users to keep the liquid from the touch glass and
TouchKit Tools Installation
TouchKit Installation for Windows XP
ouch Kit for WinXP
Capacitive Touch has auto calibration controller via USB interface. There are two different
methods which can initiate the touch auto calibration: (1) Reboot the Terminal. (2) Switch Off the
creen will not operate with either a gloved hand or with a mechanical stylus. It is
Capacitive touch might need the
ouch operation or the humidity goes too
. Thus, FEC recommends users to keep the liquid from the touch glass and
