15” 1
st
Touch Display
1.
Release 2 thumb screw at the
back side of Display
2.
Lift the Display Module up to
disassemble from the main
unit of terminal
3.
Display and main body units
are separated.
4.
Reverse the process can
assembly back the Touch
Display Module.
** please make sure the touch
display module is firmly
connected to the docking slot
**
**Note**
During the process of disassembly and installation, please ensure the terminal is
“Power Off” and remove AC. “Hot Swap” could activate internal protection to block
touch display functionality.
8
Touch Display Installation & Swapping
thumb screw at the
Lift the Display Module up to
disassemble from the main
Display and main body units
Reverse the process can
assembly back the Touch
** please make sure the touch
display module is firmly
connected to the docking slot
During the process of disassembly and installation, please ensure the terminal is
“Power Off” and remove AC. “Hot Swap” could activate internal protection to block
During the process of disassembly and installation, please ensure the terminal is
“Power Off” and remove AC. “Hot Swap” could activate internal protection to block
