background image

Instruction manual for installation, maintenance and use 

Electric Kettles PMDE… 

- GB - 

Page 

5 di 16

 

 

 

 

1.1. GENERAL REMINDERS 

  Read the warnings contained in this manual carefully as they provide important information concerning 

safety during the installation, use and maintenance of the appliance. 

  Keep these instructions carefully! 

  Only personnel trained for its specific use should use the equipment. 

  Keep the appliance under control during use. 

  The appliance should be used only for the purpose for which it has been specifically designed; other 

uses are improper and hence dangerous. 

  During operation surfaces can become hot and require special operation. 

  Unplug the appliance in case of failures or improper operation. 

  Apply exclusively to a service centre for repairs or maintenance. 

  Any important information about the appliance required for technical service is contained in the technical 

data plate (see figure “

View of appliance

”).  

  If technical assistance is required, the trouble must be described in as much detail as possible, so that a 

service technician will be able to understand the nature of the problem. 

  Gloves should be worn to protect the hands during installation and maintenance operations. 

Warning! :  Follow the fire prevention regulations very carefully. 

Summary of Contents for PMDE100

















Reviews: