13
PHASE FAIL
2
Use arrows to enable the phase failure test. Press to begin test. The phase failure should be indicated.
Use arrows to disable the phase failure test. Press to end test. The phase failure should clear.
PHASE REVERSE
2
Use arrows to enable the phase reversal test. Press to begin test. The phase reversal should be indicated.
Use arrows to disable the phase reversal test. Press to end test. The phase reversal should clear.
FLAGS
These flags are a part of a manufacturer level testing tool.
FACTORY
TOOLS
3
CLEAR DATA HISTORY
Use arrows to enable this option. Press to confirm. Data History will be cleared and option will automati-
cally revert back to disabled.
NOTE: Once cleared, this data cannot be recovered.
3
CLEAR EVENT LOG
Use arrows to enable this option. Press to confirm. The Event Log will be cleared and option will automati-
cally revert back to disabled.
NOTE: Once cleared, this data cannot be recovered.
3
RESET TO DEFAULTS
Use arrows to enable this option. Press to confirm. The Mark II
XG
will be reset to “out of the box” default
settings.
NOTE:
All user and factory configuration settings will be lost.
ABOUT
Information is shown for: Model Number, Serial Number, Software (Part Number, Build Number, Date), and Boot Code
(Part Number, Version Information and Checksum Information).
Tools
About
