L
ISTING
I
NFORMATION
P
AGE
23
The listing label can be found on the base of the
fireplace behind the faceplate.
U.S. ENVIRONMENTAL PROTECTION AGENCY
Certified to comply with July, 1990 particulate emission standards.
This wood heater contains a catalytic combustor which needs periodic inspection and
replacement for proper operation. Consult the owner’s manual for further information. It
is against the law to operate this wood heater in a manner inconsistent with operating
instructions in the owner’s manual or if the catalytic element is deactivated or removed.
DO NOT REMOVE THIS LABEL
Fireplace Xtrordinair
LISTED FACTORY BUILT FIREPLACE
MODEL NO.
44 ELITE
TESTED TO: UL-127, UL-1482
REPORT NO.
476-1483-00 (March 1998)
INSTALL AND USE ONLY IN ACCORDANCE WITH THE MANUFACTURER'S INSTALLATION AND OWNER’S MANUAL.
CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION IN
YOUR AREA. DO NOT CONNECT THIS UNIT TO A CHIMNEY SERVING ANOTHER APPLIANCE.
MINIMUM CLEARANCES TO COMBUSTIBLES:
SIDES AND BACK
0” (0 mm)
TO STAND-OFFS
HEADER
0” (0 mm)
TO STAND-OFFS
CHIMNEY
2” (50 mm)
AT FIRST FLOOR CEILING AND ABOVE.
IN AREA ABOVE FIREPLACE, MAINTAIN 5” (126 mm) TO BACK, 4-1/2”
(115 mm) TO FRONT AND 18-1/2” (470 mm) CLEARANCE TO SIDES OF
VERTICAL CHIMNEY.
MANTEL
23” (585 mm)
TO EDGE OF FACEPLATE
TOP FACING
12” (305 mm)
TO EDGE OF FACEPLATE
SIDE FACING
2-1/2” (65 mm)
TO EDGE OF FACEPLATE
ADJACENT SIDEWALL
18” (460 mm)
TO EDGE OF FACEPLATE
10850 1
17th Pl. N.E. Kirkland, W
A
98033
MADE IN THE U.S.A. BY:
MANUFACTURE DATE:
2002
2003
Jan.
Apr.
Jul.
Oct.
2004
Feb.
May
Aug.
Nov.
2005 Mar.
Jun.
Sep.
Dec.
COMPONENTS REQUIRED FOR INSTALLATION:
•
TWO COOLING AIR DUCTS (see installation manual)
•
ONE OF THE FOLLOWING LISTED FIREPLACE CHIMNEY SYSTEMS:
(complete with components as specified in the installation manual)
FMI MODEL 8 HT
MARCO MODEL SERIES 8D
SUPERIOR MODEL TF-8
TEMCO MODEL 82 SERIES
•
CONVECTION FAN SYSTEM (see installation manual)
CHIMNEY REQUIREMENTS (see installation manual):
MINIMUM CHIMNEY HEIGHT
15 ft (4,565 mm)
MAXIMUM CHIMNEY HEIGHT
35 ft (10,650 mm)
MAXIMUM OFFSET LENGTH WITH 1 OFFSET IN CHIMNEY
8 ft (2,435 mm)
MAXIMUM OFFSET LENGTH WITH 2 OFFSETS IN CHIMNEY
4 ft (1,220 mm) per offset
MAXIMUM OFFSET ANGLE
30˚
MAXIMUM NUMBER OF ELBOWS
4
WARNING:
• For use with cord wood only.
• Operate with feed doors closed. Open to feed fire only.
• Not for use in a Mobile Home.
• Transport ashes in an air-tight non-combustible container.
• Replace glass with 5 mm Neoceram.
0316 (IGN)
WH-
SERIAL
NO.
