2
FGi.FPi.FXi
Issue
12 10/17
1.
List of Components
Description of Parts
Qty
FXi/FPi Stove Assembly
1
Multi Tool
1
Ash Pan
1
Flue Spigot Collar
1
Spigot Collar fixing screws
3
Pair of Stove Operating Gloves
1
Air Wash operating pin
1
Smokeless Zone Air limiter
1
Side firebricks (5Wide & 8kW only)
2
2.
Component Identification and Assembly
Your stove comes packed in a protective plywood crate. Carefully remove the straps and lift
off the top and upper crate. Remove any plastic packaging, open the door and remove all the
contents. See List of Components section (above) and check contents carefully.
2.1
To remove the baffle plate, first remove the fuel retainer by lifting it up and out the front of
the stove. Carefully remove the two side liners and the rear liner. Handle & store very
carefully to one side where they will not get broken.
2.2
Now the baffle plate can be removed by lifting off its supports and bringing out through the
firebox door opening.
2.3
It is sometimes useful to remove the door at this stage by opening and lifting up to slide the
hinge pins out.
2.4
Screw the air wash control pin into the air wash slider control and secure using the locknut
provided.
2.5
If installing within a smokeless zone, fit the smoke control zone air limiter bracket according
to its instructions.
2.6
Proceed to install the stove according to these instructions and current installation
standards or HETAS requirements. The internal parts of the stove can be re-assembled as
the reverse of the previous removal instructions.
Fig 1 - Multi Tool Details
Fig 2 – FGi/FXi/FPi 5, FGi/FXi/FPi 5W, FGi/FXi/FPi 8 Stove Assembly and
controls
