REV. 10-18-19 Page 6
PAVER-CP-MT/ PAVER-CP-MSI
Fig. 16
Installing battery into Piezo module.
+
-
AAA
Plastic Nut
Red Button Cap
Mounting Plate
Bottom of Pan
Spur Burner
Fig. 13
. Installing MSI assembly into bottom of pan.
Step 3:
Install the MSI ignition assembly from the bottom
of the pan as shown in Fig. 13.
Note:
The hood will slide
over top of the burner leg as shown in Fig. 14.
Step 4:
Secure the MSI ignition assembly to the pan using
the four previously removed screws.
Note:
The metal tab
aligns the burner leg underneath the spur hood as shown in
Fig. 14.
Tabs Center
Burning Spur Leg
Screws Install
From Bottom Up
Top of Pan
Fig. 14
. Installing screws from bottom of pan.
Step 5:
Using a power screwdriver install the ignition hood
over top of the MSI assembly plate. See Fig. 15. Align the
five holes from the ignition hood to the five hole of the
assembly plate, then secure in place with provided screws.
Top of Pan
Power Screwdriver
M.
Ca
tten
azo
Ha
nd M
ode
l
Fig. 15
Installing ignition hood.