24
Kalea Bay LED Outdoor Fireplace
REV. 4-17-19 Page 18
Step 6:
Carefully push the LED channel assembly connector through the wire grommet. As you push it through the
grommet sit the channel into the retainer clip. Ensure the other end of the channel is also sitting inside the other retainer
clip. See Figs. 20 & 21 as a reference.
Note:
If you are installing into a see-through fireplace install the other LED light
strip and channel the same direction.
Wir
e G
rom
me
t
Botto
m En
d
LED Channel
Assembly
Fig. 20
Installing LED lights and channel
Fig. 21
LED installed in retainer clip inside fireplace
LED LIGHTING INSTALLATION
Step 5:
Remove the LED right channel assembly from the carton (The front of the channel has a shield facing the front
with the LED wire hanging on the right side). See Figs. 19-21 for details.
Note:
If you are installing into a see-through
fireplace you will install both right and left channels assemblies.
Fig. 19
Shows LED right channel
Botto
m En
d
LED Channel Assembly
Installed in retainer clip
KALEA BAY: E LED
