8
User’s Guide
GETTING STARTED
Charge the Battery and Install a SIM Card
glowPhone requires a SIM card and a charged battery for operation.
You must install a SIM card (provided with your phone or obtained
through your network service provider) and charge the battery before
you can use glowPhone for the first time.
Note
: Always switch off the power and disconnect the charger
and any other device before removing the cover. Avoid touching
electronic components while changing the cover. Always store
and use the device with the cover attached.
Remove the Battery
1. Press at the top of the battery compartment (1) with your thumb,
and slide the cover until it stops. Lift up the cover.
1
2
2. Place the tip of your thumb in the indent (2) at the bottom
of the battery, push in the tab, and lift the battery out of the
compartment.
Summary of Contents for glowPhone
Page 1: ...glowPhone User s Guide Version 1 121707...
Page 43: ...43 User s Guide...
