4
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
WARNING: DO NOT USE ABRASIVE
CLEANERS. NEVER CLEAN THE GLASS
WHEN IT IS HOT.
CAUTION: DO NOT ATTEMPT TO TOUCH THE
DOORS WITH YOUR HANDS WHILE THE FIRE-
PLACE IS IN USE. ALWAYS USE DOOR
HANDLES. DOORS WILL BECOME VERY HOT
WHEN FIREPLACE IS IN USE.
Figure 3
ON/OFF Switch
Electronic Gas
Control Valve
OFF
I
PSI
ON
CONTROL
IGNITE
Figure 2
E
A
TPTH
TP
TH
PILO
T
PIL
O
T
ON
it
OFF
SIT Millivolt
Valve
O
N
OFF
PI
LO
T
Spark Ignitor
Gas Control
Knob
Gas Control
Knob
Spark Ignitor
Honeywell
Millivolt Valve
To light millivolt appliances refer to the de-
tailed lighting instructions found in both En-
glish and French on pages 10 and 11 of these
instructions respectively.
Millivolt and elec-
tronic appliance lighting instructions may
also be found on the pull out labels attached
to the gas control valve located within the
gas control compartment
. Refer to
Figure 2 to
locate the appropriate location for the spark
ignitor used with your appliance.
2.
When lit for the first time, this appliance will
emit a slight odor for an hour or two. This is
due to the “burn-in” of internal paints and
lubricants used in the manufacturing process.
3.
Keep lower control compartment clean by
vacuuming or brushing at least twice a year.
More frequent cleaning may be required due
to excessive lint from carpeting, bedding ma-
terials, etc. It is important that control com-
partments, burners and circulating air pas-
sageways of the appliance be kept clean.
4.
Always turn off gas to the pilot (millivolt
appliances) before cleaning. Before re-light-
ing, refer to the lighting instructions in this
manual. Instructions are also found on a pull-
out panel located on the floor of the appliance.
5.
Always keep the appliance area clear and
free from combustible materials, gasoline and
other flammable liquids.
6.
Remember, Millivolt appliances have a con-
tinuous burning pilot flame. Exercise caution
when using products with combustible va-
pors.
7.
Clean the optional glass doors only when
necessary. Wipe surface with clean, damp-
ened, soft cloth. Follow with dry, soft towel as
desired. Take care not to scratch the glass
surface.
If your appliance is equipped with an optional
remote wall switch or remote control kit the
appliance main burner may be turned on and off
with the wall switch or remote control. If the
appliance is not equipped with a wall or remote
control, the main burner must be turned off and
on with the gas control knob. Turn the knob
counter-clockwise from the PILOT position to
ON to light the main burner, and clockwise from
ON to PILOT to turn off the main burner.
To light electronic appliances refer to the de-
tailed lighting instructions found in both En-
glish and French on pages 12 and 13 of these
instructions respectively.
Millivolt and elec-
tronic appliance lighting instructions may also
be found on the pull out labels attached to the
gas control valve located within the gas con-
trol compartment
. If your appliance is equipped
with an optional remote wall switch or remote
control kit the appliance main burner may be
turner on and off with the wall switch or remote
control. If the appliance is not equipped with a
wall switch or remote control, the main burner
must be turned off and on with the gas control
switch. Toggle the switch from ON to OFF to
operate the main burner from ON to OFF.
